FNS Instrument Set

The FNS Instrument Set 3300-04 is a dedicated orthopedic instrument configuration for preparation, measurement and insertion-related work within an FNS fixation procedure. It groups the handling tools, guide-wire instruments, drilling components, depth measurement devices and insertion accessories needed for a coordinated instrument setup.

The proximal preparation and insertion group includes a Torque Limiting Attachment rated at 4 Nm for an AO Reaming Coupler, a Large Cannulated Handle with Quick Coupling and 12 mm Hexagonal connection, a Transition Interface and a Protection Sleeve. Screwdriver shafts are provided for the listed locking screw and bolts plus antirotation screws. The Multifunction Rod and insertion-handle components support the insertion instrument configuration shown in the set.

Guide-wire management is supported by the Direct Measuring Device for 3.2 mm Guide Wires, the 130 Degree Angled Guide, the Correction Guide and four 3.2 mm Guide Wires measuring 400 mm. The Depth Gauge measures up to 100 mm. A Complete Opening Drill Bit/Reamer and a 4.3 mm Drill Bit with Stopper, 413 mm in length, provide the listed drilling and preparation components.

The FNS instrument set contains instruments and an Aluminium Box only. FNS implants, bolts, antirotation screws, locking screws and other fixation components are not included in this configuration. The 19 listed REF entries and their quantities are provided in the specification table to support hospital, distributor and purchasing-team review.

WELLTRUST can support customers with configuration review, technical documentation and quotation enquiries for FNS instruments and related orthopedic fixation solutions. Contact the team when matching the instrument set with a procurement specification or procedure requirement.

Frequently Asked Questions

1. What is the FNS Instrument Set designed for?

It is designed to support guide-wire positioning, measurement, drilling, reaming and insertion-related preparation for FNS fixation procedures.

2. What guide-wire components are included?

The configuration includes a direct measuring device for 3.2 mm guide wires, a 130 Degree Angled Guide, a Correction Guide and four 3.2 mm Guide Wires measuring 400 mm.

3. What drilling and measurement tools are included?

The set includes a Complete Opening Drill Bit/Reamer, a 4.3 mm Drill Bit with Stopper measuring 413 mm in length and a Depth Gauge up to 100 mm.

4. Are FNS implants and fixation screws included?

No. This product is an instrument set. FNS implants, bolts, antirotation screws, locking screws and other fixation components are selected separately.

5. How can I obtain configuration and quotation information?

Contact WELLTRUST with your FNS instrument requirements. The team can provide configuration review, technical information and quotation support.